Temperature Effect on Power Drop of Different Photovoltaic Modules

ISBN-13: 9783659918803 / Angielski / Miękka / 2016 / 108 str.

Akram Abdulameer Abbood Al-Khazzar

Opis

This study presents the temperature effect and a performance comparison of mono-crystalline Silicon (mc-Si), poly-crystalline Silicon (pc-Si), amorphous Silicon (a-Si) and Cupper Indium Gallium di-selenide (CIGS) photovoltaic technologies under Climate Conditions of Baghdad city. Temperature influence on the solar modules electric output parameters was investigated experimentally and their temperature coefficients was calculated. These temperature coefficients are important for all systems design and sizing. The experimental results revealed that the pc-Si module showed a decrease in open circuit voltage by -0.0912V/ºC while mc-Si and a-Si had nearly -0.07V/ºC and the CIGS has -0.0123V/ºC. The results showed a slightly increase in short circuit current with temperature increasing about 0.3mA/ºC ,4.4mA/ºC and 0.9mA/ºC for mc-Si , pc-Si and both a-Si and CIGS. The mc-Si had the largest drop in output power about -0.1353W/ºC while -0.0915, -0.0114 and -0.0276 W/ºC for pc-Si, aSi and CIGS respectively. The amorphous silicon is the more suitable module for high operation temperature but it has the lowest conversion efficiency between the tested modules.

O autorze

Akram Al-Khazzar has MSc (2016) and BSc (2011) in Energy Engineering from Baghdad University. Since then, he worked as an independent researcher and he has published several scientific papers about solar energy engineering and photovoltaic systems.