Advances in Acoustics and Vibration III: Proceedings of the Third International Conference on Acoustics and Vibration (Icav2021), March 15-16, 2021

ISBN-13: 9783030765163 / Angielski / Twarda / 2021 / 286 str.

Nabih Feki; Mohamed Slim Abbes; Mohamed Taktak

Spis treści

P7- Gearbox fault identification under non-Gaussian noise and time-varying operating conditions

Stephan SCHMIDT, Fakher CHAARI, Radoslaw ZIMROZ, P. Stephan HEYNS, Mohamed HADDAR

stephan.schmidt@up.ac.za

P16- A Multiple- Grid technique–based Finite Element solution of free-surface flows in a trapezoidal open channel

Souad Mnassri, Ali Triki

ali.triki@issatgb.u-gabes.tn

P19- Rotor-ball bearings system under variable regime

Mohamed Habib FARHAT,, Xavier Chiementin, Fakher Chaari1, Taissir Hentati, Mohamed Haddar

mohamed-habib.farhat@enis.tn

P22- The Efficiency of the Rayleigh-Ritz Method Applied to In-Plane Vibrations of Circular Arches Elastically Restrained at the Two Ends and Supporting Point Masses

Ahmed BABAHAMMOU, Rhali BENAMAR

ahmedbabahammou@gmail.com

P26- Nonlinear Wind-induced Response Analysis of Substation Down-Conductor System

Guoqing Yu ,Zhitao Yan, Xinpeng Liu

903364295@qq.com

P30- Bending fatigue behaviour of a bio-based sandwich with conventional and auxetic honeycomb core

Khawla Essassi, Jean-luc Rebiere, Abderrahim El Mahi, Mahamane Toure, Mohamed amine Ben Souf, Anas Bouguecha, Mohamed Haddar

khawlaessassi@gmail.com

P31- Thermoplastic Elium recycling: Mechanical behaviour and damage mechanisms analysis by acoustic emission

Sami ALLAGUI, Abderrahim EL MAHI, Jean-luc REBIERE, Moez BEYAOUI, Anas BOUGUECHA, Mohamed HADDAR

sami11allagui@gmail.com

P34- Passive control of Tensegrity domes using Tuned Mass Dampers, a reliability approach

E. Mrabet, M. H. El Ouni, N. Ben Kahla

elyes.mrabet@isetkr.rnu.tn

P35- Dynamic analysis of a pumping station with coupling misalignment fault

Ahmed Ghorbel, Oussama Graja, Moez Abdennadher, Lassâad Walha, Mohamed Haddar

gh.ahmed.enis@gmail.com

P41- On the unidirectional free-surface flow solution in a rectangular open channel.

Souad Mnassri, Ali Triki 

ali.triki@issatgb.u-gabes.tn

P42- On the numerical solution of the rapidly varied regime in open-channel flows

Souad Mnassri, Ali Triki 

ali.triki@issatgb.u-gabes.tn

P43- Controlling of steel-pipe -based hydraulic systems using dual in-series polymeric short-sections

Mounir Trabelsi, Ali Triki

ali.triki@issatgb.u-gabes.tn

P44- Large strokes of a piezocomposite energy harvester with interdigitated electrodes accounting for geometric and material nonlinearities

Ahmed JEMAI, Sourour BAROUDI, and Fehmi NAJAR

fehmi.najar@ept.rnu.tn

P45- Transient comprehensive modelling due to pump failure

Badreddine Essaidi, Ali Triki 

ali.triki@issatgb.u-gabes.tn

P47- Innovative In-plane converter design for a Capacitive Energy Harvester

M.A. Ben Hassana, H. Samaali, F. Najar, and Hassen M. Ouakad

fehmi.najar@ept.rnu.tn

P49- Dynamic interaction between transmission error and friction coefficients for FZG-A10 spur gears

Maroua Hammami, Olfa Ksentini, Nabih Feki, Mohamed Slim Abbes, Mohamed Haddar

hammamimaroi@gmail.com

P50- Optimal linear quadratic stabilization of amagnetic bearing system

Abdelileh Mabrouk, Olfa Ksentini,Nabih Feki, Mohamed Slim Abbes, Mohamed Haddar

olfa.ing@gmail.com

P54- Evaluation of the acoustic performance of perforated multilayer absorber materials

Amine Makni, Marwa Kani, Mohamed Taktak, Mohamed Haddar

mohamed.taktak@fss.rnu.tn

P61- An anisotropic model with non-associated flow rule to predict HCP sheet metal ductility limit

Mohamed Yassine JEDIDI, Anas BOUGUECHA, Mohamed Taoufik KHABOU, Mohamed HADDAR 

mohamed-yasine.jdidi@enis.tn

P64- A model for simulating transients in looped viscoelastic pipe systems. Preliminary results

Oussama Choura, Silvia Meniconi, Sami Elaoud, Bruno Brunone

oussema.choura@gmail.com

P67- Analytical approach in the pre-design phase for vibration analysis of a flexible multibody system

Ghazoi HAMZA, Maher BARKALLAH, Hassen TRABELSI, Amir GUIZANI, Jamel LOUATI, Mohamed HADDAR

hamza.ghazoi@gmail.com

P70- Pressure calculation and fatigue of a trans-tibial prosthetic socket made from natural fiber composite

Sofiene Helaili, Wahbi Mankai, Moez Chafra 

Sofiene.helaili@ept.rnu.tn

P82- Online Adaptive MFC for Nonlinear Active Half Car System

Maroua HADDAR, Fathi DJEMAL, Riadh CHAARI, S. Caglar BASLAMISLI, Fakher CHAARI and Mohamed HADDAR

maroua.haddar@enis.tn

P87- The interaction of different transmission system using the substructuring method

Marwa Bouslema, Taher Fakhfakh, Rachid Nasri, Mohamed Haddar

zahredine.hafsi@enis.tn

P98- Combined Effect of Roughness Anisotropy and Roughness Parameters on the Friction Behavior under Boundary Lubrication

F. Elwasli, S. Mzali, F. Zemzemi, S. Mezlini

elwaslifatma@gmail.com

P105- A new dynamic model for worm drives

Ala Eddin Chakroun, Ahmed Hammami, Ana De-Juan,  Fakher Chaari, Alfonso Fernandez, Fernando Viadero, Mohamed Haddar

Chakroun.ala.eddin@gmail.com

P108- Shear-Normal Coupling Effects on Composite Shafts Dynamic Behaviour

Safa Ben Arab, Slim Bouaziz, Mohamed Haddar

safabenarab@gmail.com

P110- Experiments and Computations of a Vibrating Beam Coupled to a Granular Chain Impact Damper

Chaima Boussollaa, Vincent Debut, Jose Antunes, Tahar Fakhfakh, Mohamed Haddar

chaima.boussollaa@enis.tn

P115- Numerical analysis of transient flow in a hydraulic tree network: Zarroug aqueduct network in Gafsa, Southern Tunisia

Lazher Ayed, Zahreddine Hafsi

lazhar.ayed21@gmail.com

P116- Assessment of temperature history when abrasive milling of long fiber reinforced polymers  

F. Guesmi, M. Elfarhani, S. Ghazali, A. S. Bin Mahfouz, A. Mkaddem, A. Jarraya

ajarraya@uj.edu.sa

P117- Free vibration of sandwich nanobeam

Nouha Kammoun, Nabih Feki, Slim Bouaziz, Mounir Ben Amar, Mohamed Soula, Mohamed Haddar

kamoun.noha@gmail.com

Blurb

The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the Third International Conference on Acoustics and Vibration (ICAV2021), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held online on March 15-16, 2021, from Sfax, Tunisia. The contributions cover advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others. This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.