Jim Evans Honorary Symposium : Proceedings of the Symposium Sponsored by the Light Metals Division of The Minerals, Metals and Materials Society (TMS)

ISBN-13: 9780873397506 / Angielski / Miękka / 2010 / 446 str.

B. Li; B. Thomas; L. Zhang

Opis

This symposium represents Jim Evans, Professor of Metallurgy Emeritus and the P. Malozemoff Professor Emeritus in the Department of Materials Science and Engineering, University of California, Berkeley, which he joined in 1972. He is the author/co-author of three books and over 300 papers. His research deals with rate phenomena governing the productivity of processes for producing metals and other materials. This has involved investigations of wide ranging technologies such as aluminum reduction cells, electromagnetic casters, chemical vapor deposition, fluidized bed electrodes and batteries. His current projects include mathematical modeling of the treatment of molten metals, wireless monitoring of the electrolytic cells used for producing aluminum, recovery of water and copper from semiconductor industry waste streams, modeling of new technology for producing titanium and lithium batteries for energy storage in wireless technology. Abstracts included from the following areas:

• Materials production
• Fluid flow in materials production
• Mass transport in materials production
• Modeling of materials production
• Electrochemical phenomena in materials production
• Electromagnetic phenomena in materials production
• Sensors and measurement of physical parameters in high temperature and hostile environments
• Control of environmental impact of materials production
• Novel cells for aqueous electrolysis
• Novel cells for molten salt electrolysis
• Mathematical modeling in light metals production
• Novel batteries
• Novel leaching reactors

Spis treści

Preface.

Biography of James William Evans.

Contributions of James William Evans.

Editors.

Jim Evans Honorary Symposium.

Cast Shop Aluminum Production Joint Session: Flow and Solidification Phenomena in Nonferrous Casting.

Coupled Multi–Physics Modeling of Continuous Casting of Steel and DC Casting of Aluminum (P. Thevoz, O. Ludwig, and M. Aloe).

Metal Flow and Heat Transfer in Wagstaff Rapidfill Metal Distribution Systems for Billet DC Casting (B. Zhang).

The Effect of SF6 on the Surface Tension of AZ91D Magnesium Alloy (S. Roach, and H. Henein).

Application of Computational Fluid Flow and Experimentations to Improve Horizontal Casting Process Performance at Rio Tinto Alcan (A. Larouche).

DC Casting of Aluminum Alloys Importance of Mold Boundary Conditions (A. Baserinia, H. Ng, D. Weckman, and M. Wells).

Measurement of As–Cast Residual Stresses in an Aluminium Alloy AA6063 Billet Using Neutron Diffraction (J. Drezet, A. Evans, C. Jaquerod, and A. Phillion).

Flow Phenomena in Steel Continuous Casting.

Liquid Metal Modelling of Continuous Steel Casting (G. Gerbeth, S. Eckert, K. Timmel, and X. Miao).

Modeling on the Cast Start during Steel Continuous Casting Process (Y. Wang, and L. Zhang).

Effect of Stopper–rod Misalignment on Asymmetric Flow and Vortex Formation in Steel Slab Casting (S. Cho, G. Lee, S. Kim, R. Chaudhary, O. Kwon, and B. Thomas).

Control of Fluid Flow, Heat Transfer and Inclusions in Continuous Casting: CFD and Neural Network Studies (P. Väyrynen, S. Wang, J. Laine, and S. Louhenkilpi).

Turbulent Instabilities in a Thin Slab Mold (R. Morales, and S. Hernandez–Garcia).

Numerical Investigation of the Flow and Steel/Slag Interface Behaviors in Slab Continuous Casting Mold with Electromagnetic Brake and Argon Gas Injection (M. Zhu, and H. Yu).

Flow, Solidification, and Inclusion Behavior in Casting Processes.

Inclusion Motion and Removal in a Steel Slab Continuous Casting Strands under EMBr (L. Zhang, and Y. Wang).

A General Enthalpy Method for Molding Solidification Phenomena (V. Voller).

Modelling of Mould Filling in Open Mould Conveyor Ingot Casting (V. Nguyen, P. Rohan, J. Grandfield, K. Naidoo, and K. Oswald).

Influence of a Plunging Liquid Jet on a Dual Alloy Casting (A. Fjeld, A. Kharicha, and A. Ludwig).

Centrifugal Casting of Complex Geometries: Computational Modelling and Validation Experiments (D. McBride, N. Croft, D. Shevchenko, N. Humphreys, P. Withey, N. Green, and M. Cross).

Surface Tension and Temperature Effect on Ar Bubbles Behavior at the Solid/Liquid Interface of the Steel (S. Lee, S. Kim, and H. Lee).

Water Model Experiments for Hydrodynamic Forces Acting on Inclusion Particles in Molten Metal under Turbulent Condition (T. Kato, S. Shimasaki, and S. Taniguchi).

Metal Flow, Bubbles, and Inclusions Behavior in Refining and Reduction Vessels.

Plume Characteristics in Gas Stirred Ladles (P. Scheller, O. Volkova, and D. Ryabov).

Development of Online Sensors for Bubble Stirred Vessels (G. Brooks, X. Xu, and W. Yang).

Fluid Flow and Inclusion Behavior in a Continuous Billet Casting Tundish (Q. He, and G. Evans).

Physical Modeling of Slab Caster Tundish to Improve Yield and Quality of Steel (D. Mazumdar).

Time Dependent MHD Models for Aluminium Reduction Cells (V. Bojarevics, and K. Pericleous).

Modeling on Multiphase Fluid Flow in Aluminum Electrolysis Cell (Y. Wang, and L. Zhang).

Research and Development of Three–Dimensional Electrochemical Reactors at UC Berkeley and ICPF Prague Overview (V. Jiricny, and J. Evans).

Importance of Microexothermicity in the Assimilation and Recovery of Additions in Liquid Metals (Z. Li, and S. Argyropoulos).

Primary and Secondary Production of Metals.

Leaching of Metal Components from Waste Pcbs by Electro–Generated Chlorine in Hydrochloric Acid Solution (E. Kim, M. Kim, J. Lee, K. Yoo, and M. Kumar).

Low Cost TiCl4, the Indispensable Compound to Make Titanium (J. Withers, J. Laughlin, Y. Elkadi, A. Putilin, and R. Loutfy).

The Optimization of the Coke and Agglomerate Quantity in Lead Production in "Water–Jacket" Furnace (A. Haxhiaj, and E. Haxhiaj).

The Development of Product Microstructure "Morphology Maps" and their Significance in Describing the Decomposition of Solids (P. Hayes).

Casting Structure Phenomena.

Experience with Production Scale Usage of Optifine A High Efficiency Grain Refiner (J. Courtenay).

Development and Application of Dynamic Soft Reduction Technology for Continuous Casting Machine (C. Ji, and M. Zhu).

Electrochemical Phenomena.

An Electrochemical Technique for Minimizing Soil and Ground Water Contamination by Heavy Metals Leached from Solid Industrial Wastes (N. Shukla, M. Harbola, K. Sanjay, and R. Shekhar).

Development of Inert Anodes for Electrowinning in Calcium Chloride Calcium Oxide Melts (S. Jiao, and D. Fray).

Molten Oxide Electrolysis for Lunar Oxygen Generation using in situ Resources (A. Vai, J. Yurko, D. Wang, and D. Sadoway).

A Novel Process for Separating Silver from Waste Lead–free Solder (B. Kim, and J. Lee).

Direct Write Dispenser Printed Energy Storage Devices (C. Ho, J. Keist, B. Quan, P. Wright, and J. Evans).

Modeling.

Computational Modeling of Heap Leaching Processes (M. Cross, C. Bennett, D. McBride, A. Hernandez, T. Croft, and J. Gebhardt).

A T– Potential Formulation for Numerical Simulation of Induction Heating Processes (N. El–Kaddah, and T. Natarajan).

Global and Local Stability of Magnetically–Levitated Droplets (B. Li, X. Ai, and Y. Huo).

Improved Computational Modeling of the Flame Spray Pyrolysis Process for Silica Nanopowder Synthesis (M. Olivas–Martinez, H. Sohn, H. Jang, and T. Ring).

Mangetically–Damped Flows: Numerical Simulations and Experimental Measurements (B. Li, X. Bing, and Y. Shu).

Beyond Berkeley Times.

Electrodynamic and Thermal Interaction of Nanoparticles in Hyperthermia Cancer Therapy and Solar Energy Systems (B. Li).

Metallurgical Design Issues at Cirque du Soleil (D. Cook).

Modeling Pulsatile Blood Flow in End–to–Side Anastomoses (D. Cook, and C. Thompson).

Common Modeling Approaches in Displays: Case Studies in Organic Light Emitting Diodes and Plasma Display Panels (Deepak).

Hall Cell MHD Instability: Recent Theoretical Analyses and Experimental Support (D. Ziegler).

Author Index.

Subject Index.